...Brand CATx KVM Extenders feature controls that can be adjusted to restore image quality over long cables. • You can then manually adjust the video equalisation (fine-tuning the total system response from graphics card output to your eye). •...

...Fast Ethernet is an extension of the existing Ethernet standard. It runs on UTP data or optical fiber cable. It provides compatibility with existing 10BASE-T systems and thus enables plug-and-play upgrades from 10BASE-T. Fast Ethernet is sometim...

...Thermocouple wire or extension grade wire is used to connect the thermocouple to the sensing or control instrumentation. The conditions of measurement determine the type of thermocouple wire and insulation to be used. Temperature range, environme...

...others are for network extension. • The maximum length of one segment is 500 metres. • The maximum total length of all segments is 2500 metres. • The maximum length of one transceiver cable is 50 metres. • The minimum distance between transceivers ...

...new ServSwitch CATx KVM Extender with Built-in De-Skew and Multi Video Support (ACU2xxx series) It provides an individual built-in colour DeSkew of up to 42 ns (42 x 10-9 sec) in steps of 2.8 ns (approximately half a pixel size at 1600 x 1200 resolu...

...And although some KVM extenders support extended connections over fibre optic cabling, the administrator may require even greater distances. • IP-Based remote acces • The ideal solution is an IP-based remote access solution like the ServSwitch Wiz...

...video splitters, video extenders, and video switches all must support HDCP to take part of the key information exchange. Every active device in the transmission chain must participate in the vote on the HDCP key to ensure an open video channel. • E...

...single-mode fibre, all with an SC connector. • Other Fibre Channel equipment includes disk enclosures, drivers, extenders, hubs, interface converters, host bus adapters, routers, switches, and SCSI bridges. • Learn more: • Digital optic cable •  

...62.5- or 50-µm multimode and 7- or 9-µm single-mode fibre, all with an SC connector. • Other Fibre Channel equipment includes disk enclosures, drivers, extenders, hubs, interface converters, host bus adapters, routers, switches, and SCSI bridges.